Corrosion Control Salt Off

  All the products to clean the boat, tackle & 4wd.

The Combo Package
1 Litre SX50 + 1 Auto Mix Injector
The Combo Package is ideal for Small Boat & Jet Ski owners with a 1 litre of salt removal corrosion control solution, SX50, and a product injector which delivers the perfect metered amount of solution to the salt water cooling galleries of your engine. This product will remove the salt and with our unique triple protectant you can take comfort in knowing your cooling galleries are free from corrosion causing salt. RRP $84.50 Save $19.50 (SX50/1+AM2) $65.00 Package Special  

 

 Quantity :  1 2 3 4 5 6 7 8 9 10

 MORE GREAT SPECIALS CLICK HERE

Use SX50 with confidence  

SX50 is safe to use in your engines raw water cooling system and will not harm the environment. Laboratory and field tested SX50 is proven to remove harmful salt deposits effectively and leaves our exclusive metal protectors on the surface to coat your cooling system between uses.

 

Cooling System: During the normal operation of your engine salt deposits buildup. If these deposits are not removed the engines ability to run at the right temperature is affected and over time can damage your engine. This is caused by reduced water flow and ineffective heat exchange. SX50 will not harm impellers, gaskets or seals.

 

Corrosion: We all know how corrosive salt is and how quickly it can damage metal surfaces. Your engine cooling system is no different. Salt left in cooling galleries will eventually attack surfaces and corrode through the thin gallery walls causing major damage and repair costs.

 

Please read what our best salesmen have to say about our products:

Col Munro Port Alma

I have two outboard motors that were next to useless owing to salt build up and corrosion in the raw water cooling area. One is a 140 hp Yamaha and the other is a 15 hp Mariner.

  

Both motors had minimal hours on them but sat for lengthy periods without use. After scanning the web, I came across a product called SX50, so I purchased a litre as a last resort before considering other options.  I removed the leg from the 15 hp and connected a pond pump to the inlet then pumped the Saltex solution through the motor over night. When first turned on the amount of water travelling through was minimal but by morning I was extremely surprised at the difference. I then conducted the same operation on the 140 hp with the same result. 

 

Both motors are now back to normal operation. No over heating at all!  We are now using SX50 in a Volvo Penta with a leg and are having no problems. It certainly saved me many dollars. 

 

Thanks for a product that does what it says it will.  It is a pleasant change. 

 

Regards. 

Col  Munro.

18th May 2010

 

 

Friends of mine found a rod and reel wedged in the rocks at Shoal Bay near Darwin and challenged me to show how good SX50 is, we soaked the reel for 48 hrs then disassembled and cleaned it with just a brush and cloth in fresh water.

 

The spool was non-existent due to corrosion so we replace it and both bearings, That’s All! No polishing, scrubbing or buffing, just wiping to remove the barnacles, brushing the mud out from the gears etc. rinsing and re-oiling! It is still being used each weekend and is working fine.

If you value your boat and fishing gear you should be using SX50!!

 

Steve Jones    

Darwin

 

100% Australian Made When purchasing and using the SX50 range of products you can take comfort in the knowledge that the products are manufactured locally near Brisbane in Queensland.

Money Back Guarantee If you are not 100% satisfied with your purchase we will refund 100% of the purchase price of the product. Refer to our policies for more details